Cisco 7941G Administration Manual page 122

Network Configuration Menu
Table 26: Network Configuration Menu Options
Option
Load Server
RTP Control Protocol
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
102
Description
Used to optimize installation time for
phone firmware upgrades and offload the
WAN by storing images locally, negating
the need to traverse the WAN link for each
phone's upgrade.
You can set the Load Server to another
TFTP server IP address or name other than
the TFTP Server 1 or TFTP Server 2 from
which the phone firmware can be retrieved
for phone upgrades. When the Load Server
option is set, the phone contacts the
designated server for the firmware
upgrade.
The Load Server option allows
Note
you to specify an alternate TFTP
server for phone upgrades only.
The phone continues to use TFTP
Server 1 or TFTP Server 2 to
obtain configuration files. The
Load Server option does not
provide management of the
process and of the files, such as
file transfer, compression, or
deletion.
Indicates whether the phone supports the
Real-Time Control Protocol (RTCP).
Settings include:
• Enabled
• Disabled-default
If this feature is disabled, several call
statistic values display as 0. For additional
information, see the following sections:
• Call Statistics Screen, on page 184
• Streaming Statistics, on page 204
Cisco Unified IP Phone Settings
To Change
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.
From Cisco Unified
Communications Manager
Administration, choose Device >
Phone > Phone Configuration.