Cisco Unified Communications Manager User Addition - Cisco 7941G Administration Manual

Cisco Unified Communications Manager User Addition

To set up these services, choose Device > Device Settings > Phone Services from Cisco Unified
Communications Manager Administration. For more information, see Cisco Unified Communications Manager
Administration Guide and to Cisco Unified Communications Manager System Guide.
After you configure these services, verify that your users have access to the Cisco Unified CM User Options
web pages, from which they can select and subscribe to configured services. See
Subscription and Setup, on page 237
Cisco Unified IP Phones can support up to four HTTP or HTTPS active client connections and up to four
HTTP or HTTPS active server connections at one time. A few examples of HTTP or HTTPS services include:
• Extension Mobility
• Directories
• Messages
To configure extension mobility services for users, see Cisco Unified Communications Manager Features
Note
and Services Guide.
Cisco Unified Communications Manager User Addition
Adding users to Cisco Unified Communications Manager allows you to display and maintain information
about users and allows each user to perform these tasks:
• Access the corporate directory and other customized directories from a Cisco Unified IP Phone.
• Create a personal directory.
• Set up Speed Dial and Call Forwarding numbers.
• Subscribe to services that are accessible from a Cisco Unified IP Phone.
You can add users to Cisco Unified Communications Manager using either of these methods:
• To add users individually, choose User Management > End User from Cisco Unified Communications
• To add users in batches, use the Bulk Administration Tool. This method also enables you to set an
• To add users from your corporate LDAP directory, choose System > LDAP > LDAP System from
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
150
Manager Administration.
For more information on adding users, see the Cisco Unified Communications Manager Administration
Guide. For details on user information, see the Cisco Unified Communications Manager System Guide.
identical default password for all users.
For more information, see the Cisco Unified Communications Manager Bulk Administration Guide.
Cisco Unified Communications Manager Administration.
After the Enable Synchronization from LDAP Server is enabled, you will not be able
Note
to add additional users from Cisco Unified Communications Manager Administration.
for a summary of the information that you must provide to end users.
Features, Templates, Services, and Users
Phone Features User