Set Tftp Server 2 Field; Set Dhcpv6 Field; Set Ipv6 Address Field - Cisco 7941G Administration Manual

Set TFTP Server 2 Field

Set TFTP Server 2 Field
Note If you forgot to unlock the CTL or ITL file, you can change the TFTP Server 2 address in either file, then
erase them by pressing Erase from the Security Configuration menu. A new CTL or ITL file downloads
from the new TFTP Server 2 address.
Procedure
Step 1 Unlock the CTL or ITL file if necessary (for example, if you are changing the administrative domain of the
phone). If both the CTL and ITL files exist, unlock either of the files.
Step 2 Unlock network configuration options.
Step 3
Enter an IP address for the TFTP Server 1 option.
Step 4 Scroll to the TFTP Server 2 option, press Edit, and then enter a new backup TFTP server IP address.
Step 5 Press Validate, and then press Save.

Set DHCPv6 Field

Procedure
Step 1 Unlock network configuration options.
Step 2 Scroll to the DHCPv6 option and press No to disable DHCP, or press Yes to enable DHCP.
Step 3
Press Save.

Set IPv6 Address Field

Procedure
Step 1
Unlock network configuration options.
Step 2 Set the DHCPv6 option to No.
Step 3 Scroll to the IP Address option, press Edit, and then enter a new IP Address.
Step 4 Press Validate and then press Save.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
80
Cisco Unified IP Phone Settings