Cisco 7941G Administration Manual page 162

Telephony Features Available for Cisco Unified IP Phone
Feature
SSH Access
Time-of-Day Routing
Time Zone Update
Transfer
UCR 2008
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
142
Description
Allows the administrator to enable or disable the SSH
Access setting using the Cisco Unified CM Administration
application.
This option indicates whether the phone supports the SSH
Access.
Settings include:
• Enabled
• Disabled (default)
When enabled, it allows the phone to accept the SSH
connections.
Disabling the SSH server functionality of the phone blocks
the SSH access to the phone.
Restricts access to specified telephony features by time
period.
Updates the Cisco Unified IP Phone with time zone
changes.
Allows users to redirect connected calls from their phones
to another number.
The IP Phones using SCCP support Unified Capabilities
Requirements (UCR) 2008 by providing the following
functions:
• Support for Federal Information Processing Standard
(FIPS) 104-2
• Support for TVS IPv6
• Support for 80-bit SRTCP Tagging
As an IP Phone administrator, some of these functions
require you to set up specific parameters in Cisco Unified
Communications Manager Administration.
Features, Templates, Services, and Users
Configuration reference
To configure the parameter in the Cisco
Unified CM Administration application,
choose Device > Phone, select the
appropriate IP Phones, scroll to the Product
Specific Configuration Layout pane and
select Enable from the SSH Access
drop-down list box.
If you set the same parameter in the
Common Phone Profile window (Device >
Device Settings > Common Phone
Profile), the precedence order of the
settings is:
1 Phone Configuration window settings
2 Common Phone Profile window settings
For more information, see:
• Cisco Unified Communications
Manager Administration Guide,
"Time Period Configuration" chapter
• Cisco Unified Communications
Manager System Guide,
"Time-of-Day Routing" chapter
For more information, see Cisco Unified
Communications Manager Administration
Guide, "Date/Time Group Configuration"
chapter.
Requires no configuration.
See UCR 2008 Setup, on page 156