Appendix B Feature Support By Protocol For Cisco Unified Ip Phone - Cisco 7941G Administration Manual

Feature Support by Protocol for Cisco Unified IP
Phone
This appendix provides information about feature support for the Cisco Unified IP Phones using the SCCP
or SIP protocol with Cisco Unified Communications Manager.
The following table provides a high-level overview of calling features and their support by protocol. This
table focuses primarily on end user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, see Cisco Unified
IP Phone 7962G, 7942G, 7961G, 7961G-GE, 7941G, and 7941G-GE User Guide for Cisco Unified
Communications Manager.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the user guide are referenced in the following table.
Table 53: Cisco Unified IP Phone Feature Support by Protocol
Features Protocol:
SCCP
Calling Features
Abbreviated Dialing Supported
Agent Greeting Supported
Assisted Directed Call Not
Park supported
Audible Message Supported
Waiting Indicator
AutoAnswer Supported
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
A P P E N D I X
Protocol: SIP For More Information
Supported Basic Call Handling, Placing a Call:
Additional Options
Supported Basic Call Handling, Answering a Call
Supported Advanced Call Handling, Storing and
Retrieving Parked Calls
Supported Accessing Voice Messages
Supported Using a Handset, Headset, and
Speakerphone, Using Auto Answer
Communications Manager 9.0 (SCCP and SIP)
B
241