Status Menu; Status Messages Screen - Cisco 6921 Administration Manual

Status Menu

Table 7-1 Model Information Settings for the Cisco Unified IP Phone 6900 Series (continued)
Option Description
Unified Video Indicates if video call is enabled or disabled.
Advantage
Active Load Version of firmware currently installed on the
phone.
Inactive Load Version of firmware installed on the phone,
but not currently running. The "Inactive
Load" label also displays the status of the
load, such as "Upgrade in Progress" or
"Upgrade Failed."
Last Upgrade Date of the most recent firmware upgrade.
Active Server IP address or name of the server to which the
phone is registered.
Stand-by Server IP address or name of the standby server.
Backlight On Time Time of day the backlight is to automatically
turn itself on for days listed in the off
schedule.
Backlight On Amount of time the backlight is to be active
Duration for when it is turned on by the programmed
schedule.
Backlight Idle Time duration how long to wait before the
Timeout backlight is turned off when it was turned on
by user activity.
Days Backlight Not Days that the backlight is to remain off by
Active default.
Status Menu
To display the Status menu, press the Applications button and then select Administrator Settings >
Status. To exit the Status menu, press the Back
The Status menu includes theses options, which provide information about the phone and its operation:
•
•
•

Status Messages Screen

The Status Messages screen displays the 10 most recent status messages that the phone has generated.
You can access this screen at any time, even if the phone has not finished starting up.
the status messages that might appear. This table also includes actions you can take to address errors.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
7-2
Status Messages—Displays the Status Messages screen, which shows a log of important system
messages. For more information, see the
Network Statistics—Displays the Network Statistics screen, which shows Ethernet traffic statistics.
For more information, see the
Call Statistics—Displays counters and statistics for the current call. For more information, see the
"Call Statistics Screen" section on page
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
softkey.
"Status Messages Screen" section on page
"Network Statistics Screen" section on page
7-8.
Chapter
7-2.
7-6.
Table 7-2 describes
OL-24567-01