Http Configuration Menu - Cisco 7941G Administration Manual

Cisco Unified IP Phone Settings
Option
Auto Answer Preferences
Speed Dials
Related Topics
Display Settings Menu, on page 60
Device Configuration Menu, on page 84

HTTP Configuration Menu

The HTTP Configuration menu displays the URLs of servers from which the phone obtains a variety of
information. This menu also displays information about the idle display on the phone.
Note Cisco Unified IP Phones do not support URLs with IPv6 addresses in the URL. This includes hostname
which maps to an IPv6 address for directories, services, messages, and information URLs. If you support
phone use of URLs, you must configure the phone and the servers that provide URL services with IPv4
addresses.
The following table describes the HTTP Configuration menu options.
Table 18: HTTP Configuration Menu Options
Option
Directories URL
Services URL
Messages URL
Description
Displays a sub-menu that indicates
whether auto answer is enabled
(Yes) or disabled (No) for the each
line.
Displays a sub-menu that displays
the lines available on the phone.
Select a line to see the speed dial
label and number assigned to that
line.
Description
URL of the server from which
the phone obtains directory
information.
URL of the server from which
the phone obtains
Cisco Unified IP Phone
services.
URL of the server from which
the phone obtains message
services.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
HTTP Configuration Menu
To Change
From Cisco Unified Communications
Manager Administration, choose Call
Routing > Directory Number .
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Add a New Speed Dial .
To change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Communications Manager 9.0 (SCCP and SIP)
89