Cisco 7941G Administration Manual page 153

For cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs Also See for 7941G:
Table of Contents

Advertisement

Features, Templates, Services, and Users
Feature
Intercom
Join/Select
Join Across Lines/Select
Line select
Description
Allows users to place and receive intercom calls using
programmable phone buttons. You can configure intercom
line buttons to:
• Directly dial a specific intercom extension.
• Initiate an intercom call and then prompt the user to
enter a valid intercom number.
Note
If your user logs into the same phone on a daily
basis using their Cisco Extension Mobility profile,
assign the phone button template that contains
intercom information to their profile, and assign
the phone as the default intercom device for the
intercom line.
Allows a user to join two or more calls that are on one line
to create a conference call and remain on the call.
Allows users to apply the Join feature to calls that are on
multiple phone lines.
If this feature is disabled (default), then the ringing line is
selected. When enabled, the primary line is picked up even
if a call is ringing on another line. The user must manually
select the other line.
This feature can also be enabled or disabled for
Note
Extension Mobility.
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Telephony Features Available for Cisco Unified IP Phone
Configuration reference
For more information, see Cisco Unified
Communications Manager Feature and
Services Guide, "Intercom" chapter.
For more information, see:
Softkey Templates, on page
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phone" chapter
For more information, see:
Softkey Templates, on page
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phones" chapter.
For more information, see the option
"Always use prime line" in the following
chapters of Cisco Unified Communications
Manager Administration Guide:
• "Device Profile Configuration"
• "Common Phone Profile
Configuration"
• "Cisco Unified IP Phone
Configuration"
Communications Manager 9.0 (SCCP and SIP)
148.
148.
133

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7941g-ge7961g7961g-ge7962g7942g

Table of Contents