Cisco 7941G Administration Manual page 148

Telephony Features Available for Cisco Unified IP Phone
Feature
Cisco Unified
Communications Manager
Assistant
Client Matter Codes
(CMC)
(SCCP phones only)
Conference
Configurable Call Forward
display
CTI Applications
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
128
Description
Enables managers and their assistants to work together
more effectively by providing a call-routing service,
enhancements to phone capabilities for the manager, and
desktop interfaces that are primarily used by the assistant.
Enables a user to specify that a call relates to a specific
client. After dialing the number, the user enters the CMC
before the call connects.
If you are using this feature, you must disable
Note
Enbloc dialing. See Enbloc dialing in this table
for details.
Allows a user to talk simultaneously with multiple parties
by calling each participant individually. Conference
features include Conference, Join, cBarge, and MeetMe.
Allows a noninitiator in a standard (ad hoc) conference to
add or remove participants; also allows any conference
participant to join together two standard conferences on
the same line.
Allows you to specify information that appears on a phone
when a call is forwarded. This information can include the
caller name, caller number, redirected number, and original
dialed number.
A computer telephony integration (CTI) route point can
designate a virtual device to receive multiple, simultaneous
calls for application-controlled redirection.
Features, Templates, Services, and Users
Configuration reference
For more information, see Cisco
Unified Communications Manager Features
and Services Guide, "Cisco IP Manager
Assistant With Proxy Line Support" and
"Cisco IP Manager Assistant With Shared
Line Support" chapters.
For more information, see Cisco
Unified Communications Manager Features
and Services Guide, "Client Matter Codes
and Forced Authorization Codes" chapter.
For more information, see
Cisco Unified Communications Manager
System Guide, "Cisco Unified IP Phones"
chapter
The Advance Adhoc Conference service
parameter allows you to enable these
features. Advance Adhoc Conference is
disabled by default in Cisco Unified
Communications Manager Administration.
For complete information, see the
Cisco Unified Communications Manager
System Guide, "Conference Bridges"
chapter.
Note Be sure to inform your users
whether these features are
activated.
For more information, see:
• Cisco Unified Communications
Manager Administration Guide,
"Cisco Unified IP Phone
Configuration" chapter.
• Cisco Unified Communications
Manager System Guide, "Cisco
Unified IP Phones" chapter.
For more information, see Cisco Unified
Communications Manager Administration
Guide, "CTI Route Point Configuration"
chapter.