Sip Configuration Menu For Sip Phones Only; Sip General Configuration Menu - Cisco IP Phone Administration Manual

Device Configuration Menu
Table 4-7
Designation
(Authentication icon)
(Encryption icon)

SIP Configuration Menu for SIP Phones Only

The SIP Configuration menu contains these sub-menus:
•
•

SIP General Configuration Menu

The SIP General Configuration menu displays information about the configurable SIP parameters on the
phone.
Table 4-8 SIP General Configuration Menu Options
Option Description
Preferred Displays the CODEC to use when a call is initiated. This value will
CODEC always be set to none.
Out of Band Displays the configuration of the out-of-band signaling (for tone
DTMF detection on the IP side of a gateway). The Cisco Unified IP Phone
(SIP) supports out-of-band signaling by using the AVT tone method.
This value will always be set to avt.
Register with This value will always be set to Yes.
Proxy
Register Expires Displays the amount of time, in seconds, after which a registration
request expires.
Phone Label Displays the text that is displayed on the top right status line of the
LCD on the phone. This text is for end user display only and has no
effect on caller identification or messaging. This value will always
be set to null.
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-20
Cisco Unified Communications Manager Server Designations (continued)
SIP General Configuration Menu, page 4-20
Line Settings Menu for SIP Phones, page 4-21
Table 4-8 describes the options in this menu.
Chapter 4
Description
Appears as a shield and indicates that the call is from a trusted device,
and that the connection to the Cisco Unified Communications
Manager is authenticated. For more information about authentication,
see Cisco Unified Communications Manager Security Guide.
Appears as a padlock and indicates that the call is from a trusted
device, and that the connection to the Cisco Unified Communications
Manager is authenticated and encrypted. For more information about
authentication and encryption, see Cisco Unified Communications
Manager Security Guide.
The Encryption icon is also displayed when a Cisco Unified IP Phone
is configured as protected. For more information about protected calls,
see Cisco Unified Communications Manager Security Guide.
Protected calls are not authenticated.
Configuring Settings on the Cisco Unified IP Phones
To Change
Display only—cannot configure.
Display only—cannot configure.
Display only—cannot configure.
From Cisco Unified
Communications Manager
Administration, choose Device > 
Device Settings > SIP Profile.
Display only—cannot configure.
OL-23091-01