Sip Configuration Menu (Sip Phones Only) - Cisco 7942G Administration Manual

Unified ip phone for cisco unified communications manager 6.1(3)
Hide thumbs Also See for 7942G:
Table of Contents

Advertisement

Device Configuration Menu
Table 4-4
Cisco Unified Communications Manager Server State
State
Active
Standby
Blank
An option may also display one of more of the designations or icons shown in
Table 4-5
Designation
SRST
TFTP
Authentication icon
Encrypted icon

SIP Configuration Menu (SIP Phones Only)

The SIP Configuration menu contains these sub-menus:
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.1(3)
4-12
Cisco Unified Communications Manager Server Designations
Description
Indicates a Survivable Remote Site Telephony router capable of providing
Cisco Unified Communications Manager functionality with a limited
feature set. This router assumes control of call processing if all other Cisco
Unified Communications Manager servers become unreachable. The SRST
Cisco Unified Communications Manager always appears last in the list of
servers, even if it is active.
For more information, refer to Cisco Unified Communications Manager
Administration Guide.
Indicates that the phone was unable to register with a Cisco Unified
Communications Manager listed in its configuration file, and that it
registered with the TFTP server instead.
Indicates that the connection to the Cisco Unified Communications
Manager is authenticated. For more information about authentication, refer
to Cisco Unified Communications Manager Security Guide.
Indicates that the connection to the Cisco Unified Communications
Manager is authenticated and encrypted. For more information about
authentication and encryption, refer to Cisco Unified Communications
Manager Security Guide.
SIP General Configuration Menu, page 4-13
Line Settings Menu (SIP Phones Only), page 4-14
Chapter 4
Description
Cisco Unified Communications Manager server from which the
phone is currently receiving call-processing services.
Cisco Unified Communications Manager server to which the phone
switches if the current server becomes unavailable.
No current connection to this Cisco Unified Communications
Manager server.
Configuring Settings on the Cisco Unified IP Phone
Table
4-5.
OL-17679-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7962g

Table of Contents