Sip Configuration Menu (Sip Phones Only) - Cisco CP-7942G Software Manual

Unified ip phone administration guide for cisco unified communications manager 7.0 (sccp and sip)
Hide thumbs Also See for CP-7942G:
Table of Contents

Advertisement

Device Configuration Menu
Table 4-6
Designation
SRST
TFTP
(Authentication icon)
(Encryption icon)

SIP Configuration Menu (SIP Phones Only)

The SIP Configuration menu contains these sub-menus:
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
4-12
Cisco Unified Communications Manager Server Designations
SIP General Configuration Menu, page 4-13
Line Settings Menu (SIP Phones Only), page 4-14
Chapter 4
Description
Indicates a Survivable Remote Site Telephony router capable of
providing Cisco Unified Communications Manager functionality with
a limited feature set. This router assumes control of call processing if
all other Cisco Unified Communications Manager servers become
unreachable. The SRST Cisco Unified Communications Manager
always appears last in the list of servers, even if it is active. For more
information, refer to Cisco Unified Communications Manager
Administration Guide.
You configure an SRST router address in the Cisco Unified
Communications Manager Administration SRST Reference
Configuration window (choose System > SRST). You configure an
SRST reference in the Device Pool Configuration window (choose
System > Device Pool).
Indicates that the phone was unable to register with a Cisco Unified
Communications Manager listed in its configuration file, and it
registered with the TFTP server instead.
Indicates that the connection to the Cisco Unified Communications
Manager is authenticated. For more information about authentication,
refer to Cisco Unified Communications Manager Security Guide.
Indicates that the connection to the Cisco Unified Communications
Manager is authenticated and encrypted. For more information about
authentication and encryption, refer to Cisco Unified Communications
Manager Security Guide.
The Encryption icon is also displayed when a Cisco Unified IP phone
is configured as protected. For more information about protected calls,
refer to Cisco Unified Communications Manager Security Guide.
Protected calls are not authenticated.
Configuring Settings on the Cisco Unified IP Phone
OL-15483-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

7942g7962g

Table of Contents