Appendix A Printer Specifications - Printronix L1024 Maintenance Manual

Mechanical
Printing Method:
Photosensitive Material:
Imaging Device:
Toner:
Fuser:
Dimensions:
Weight (Printer Only):
Case:
Electrical
Operation:
Standby Mode:
Energy Saving Mode:
Recommended Cooling:
Appendix A – Printer Specifications
Appendix A
Printer Specifications
Electrophotographic, using diode laser
(black writing)
Organic Photoconductor (OPC) drum
Laser diode
1-1/2 component toner / developer system
Heat and pressure roller, with electronic temperature
selection and control
H = 9.8 inch (25 cm)
W = 18.2 inch (46 cm)
D = 19.3 inch (49 cm) (with Entry Paper Guide and Exit
Paper Guide removed)
58 lbs. (26.3 kg), including printer;
excluding packaging and consumables
Impact-resistant plastic
90 to 132 VAC @ 47 to 63 Hz (single phase)
198 to 264 VAC @ 47 to 63 Hz (single phase)
< 1500 Watts (Peak while fusing)
< 1000 Watts (Average while fusing)
< 300 Watts (average for 80 F ambient)
< 45 Watts
4000 BTU/hr @ 100% printing
A–1