D-Link xStack DGS-3420 Series Reference Manual page 635

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
55-15 show mac_based_access_control auth_state ports
Description
This command is used to display MAC-based access control authentication MAC information.
Format
show mac_based_access_control auth_state ports {<portlist>}
Parameters
<portlist> - (Optional) Specify the ports to display.
Restrictions
None.
Example
To display MAC-based access control authentication MAC information:
DGS-3420-28SC:admin# show mac_based_access_control auth_state ports
Command: show mac_based_access_control auth_state ports
(P): Port-based
Port MAC Address
------ -------------------- ---- -------------- ---- ---- -----------
1 00-00-00-00-00-01
1 00-00-12-00-03-00
3 00-00-00-00-00-02(P) 1
Total Authenticating Hosts
Total Authenticated Hosts
Total Blocked Hosts
DGS-3420-28SC:admin#
55-16 show mac_based_access_control
Description
This command is used to display MAC-based access control information.
Format
show mac_based_access_control {ports {<portlist>}}
Prio: Priority
Original State
RX VID
1 Authenticated
1 Blocked
Authenticated
: 0
: 2
: 1
VID Prio Aging Time/
Block Time
- 6 1439
- - 286
- 6 1440
630