D-Link xStack DGS-3420 Series Reference Manual page 180

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
None.
Example
To display the configuration of out-of-band management interfaces:
DGS-3420-28SC:admin#show out_band_ipif
Command: show out_band_ipif
Status
IP Address
Subnet Mask
Gateway
Link Status
DGS-3420-28SC:admin#
11-9 enable ipif_ipv6_link_local_auto
Description
This command is used to enable the auto configuration of link local address when there are no IPv6
addresses explicitly configured. When an IPv6 address is explicitly configured, the link local address
will be automatically configured, and the IPv6 processing will be started. When there is no IPv6
address explicitly configured, by default, link local address is not configured and the IPv6 processing
will be disabled. By enabling this automatic configuration, the link local address will be automatically
configured and IPv6 processing will be started.
Format
enable ipif_ipv6_link_local_auto [<ipif_name 12> | all]
Parameters
<ipif_name 12> - The name of the interface.
all - All of the IP interfaces.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
: Enable
: 192.168.0.1
: 255.255.255.0
: 0.0.0.0
: LinkDown
175