D-Link xStack DGS-3420 Series Reference Manual page 553

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To display the JWAC update server:
DGS-3420-28SC:admin#show jwac update_server
Command: show jwac update_server
Index IP
----- ------------------
1 172.18.0.0/21
2 172.18.0.0/21
3 172.18.0.0/21
DGS-3420-28SC:admin#
45-26 show jwac ports
Description
This command is used to display the port configuration of JWAC.
Format
show jwac ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a port range to show the configuration of JWAC.
Restrictions
None.
Example
To display JWAC ports 1 to 4:
DGS-3420-28SC:admin#show jwac ports 1-4
Command: show jwac ports 1-4
Port State
----- --------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
DGS-3420-28SC:admin#
TCP/UDP Port
------ ----
TCP 1
TCP 2
TCP 3
Aging Time Idle Time
(min) (min)
---------- ---------
1440 Infinite
1440 Infinite
1440 Infinite
1440 Infinite
State
-------
Active
Active
Active
Block Time Max
(sec) Hosts
---------- -----
60 100
60 100
60 100
60 100
548