D-Link xStack DGS-3420 Series Reference Manual page 811

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display the 802.1p user priority:
DGS-3420-28SC:admin#show 802.1p user_priority
Command: show 802.1p user_priority
QoS Class of Traffic
Port 1
Priority-0 ->
Priority-1 ->
Priority-2 ->
Priority-3 ->
Priority-4 ->
Priority-5 ->
Priority-6 ->
Priority-7 ->
Port 2
Priority-0 ->
Priority-1 ->
Priority-2 ->
Priority-3 ->
Priority-4 ->
Priority-5 ->
Priority-6 ->
Priority-7 ->
DGS-3420-28SC:admin#
5-11 config 802.1p default_priority
Description
This command is used to specify default priority for untagged packets received on a port of the switch.
Format
config 802.1p default_priority [<portlist> | all ] <priority 0-7>
Parameters
<portlist> - Specify a range of ports for which the default priority is to be configured. That is, a range
of ports for which all untagged packets received will be assigned the priority specified below. The
<Class-2>
<Class-0>
<Class-1>
<Class-3>
<Class-4>
<Class-5>
<Class-6>
<Class-7>
<Class-2>
<Class-0>
<Class-1>
<Class-3>
<Class-4>
<Class-5>
<Class-6>
<Class-7>
806