D-Link xStack DGS-3420 Series Reference Manual page 539
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
45-7
enable jwac udp_filtering
Description
This command is used to enable the JWAC UDP filtering function. When UDP filtering is enabled, all
UDP and ICMP packets except DHCP and DNS packets from unauthenticated hosts will be dropped.
A Ping packet will pass thought when the JWAC authenticating time is between 0 and 30.
Format
enable jwac udp_filtering
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable JWAC UDP filtering:
DGS-3420-28SC:admin#enable jwac udp_filtering
Command: enable jwac udp_filtering
Success.
DGS-3420-28SC:admin#
45-8
disable jwac udp_filtering
Description
This command is used to disable JWAC UDP filtering.
Format
disable jwac udp_filtering
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
534
Advertisement
Table of Contents
