D-Link xStack DGS-3420 Series Reference Manual page 306

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
22-1 create dhcp excluded_address
Description
This command is used to create a DHCP server exclude address. The DHCP server assumes that all
IP addresses in a DHCP pool subnet are available for assigning to DHCP clients. Use this command
to specify the IP address that the DHCP server should not assign to clients. This command can be
used multiple times in order to define multiple groups of excluded addresses.
Format
create dhcp excluded_address begin_address <ipaddr> end_address <ipaddr>
Parameters
begin_address - Specify the starting address of the IP address range.
<ipaddr> - Specify the starting address of the IP address range.
end_address - Specify the ending address of the IP address range.
<ipaddr> - Specify the ending address of the IP address range.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To specify the IP address that DHCP server should not assign to clients:
DGS-3420-28SC:admin#create dhcp excluded_address begin_address 10.10.10.1
end_address 10.10.10.10
Command: create dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Success.
DGS-3420-28SC:admin#
22-2 delete dhcp excluded_address
Description
This command is used to delete a DHCP server exclude address.
Format
delete dhcp excluded_address [begin_address <ipaddr> end_address <ipaddr> | all]
301