Enable Stp; Disable Stp - D-Link xStack DGS-3420 Series Reference Manual
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Success.
DGS-3420-28SC:admin#
16-9
enable stp
Description
Although it is possible to modify to allow a user to enable STP per instance, CIST should be enabled
first before enabling other instances. When a user enables the CIST, all MSTIs will be enabled
automatically if FORCE_VERSION is set to MSTP and there is at least one VLAN mapped to this
instance.
Format
enable stp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable STP:
DGS-3420-28SC:admin#enable stp
Command: enable stp
Success.
DGS-3420-28SC:admin#
16-10 disable stp
Description
This command is used to disable STP functionality in every existing instance.
Format
disable stp
905
Advertisement
Table of Contents
