D-Link xStack DGS-3420 Series Reference Manual page 468

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
enable - Enable the RADIUS authentication function on the specified ports.
auth_accounting - Specifies that after the client authenticated, accounting messages will
be sent to the RADIUS server. This is the default option.
auth_only - Specifies that after the client authenticated, accounting messages will not be
sent to the RADIUS server.
accounting_only - Specifies that authentication is not needed. If the client joins a group,
accounting messages will be sent to the RADIUS server.
disable - Disable the RADIUS authentication function on the specified ports.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable IGMP Access Control for all ports:
DGS-3420-28SC:admin#config igmp access_authentication ports all state enable
Command: config igmp access_authentication ports all state enable
Success.
DGS-3420-28SC:admin#
39-25 show igmp access_authentication ports
Description
This command is used to display the current IGMP Access Control configuration.
Format
show igmp access_authentication ports [all | <portlist>]
Parameters
all - Specify all ports to be displayed.
<portlist> - Specify a range of ports to be displayed.
Restrictions
None.
Example
To display the IGMP Access Control status for ports 1-4:
DGS-3420-28SC:admin#show igmp access_authentication ports 1:1-1:4
Command: show igmp access_authentication ports 1:1-1:4
463