D-Link xStack DGS-3420 Series Reference Manual page 377

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#show ddm ports 1:21-1:22 status
Command: show ddm ports 1:21-1:22 status
Port Temperature
(in Celsius)
------- ------------- ---------- -------------- ---------- ------------
1:21 21.5
1:22 -
CTRL+C ESC q Quit
To display port 21's configuration:
DGS-3420-28SC:admin#show ddm ports 1:21 configuration
Command: show ddm ports 1:21 configuration
Port: 1:21
--------------------------------------------
DDM State : Enabled
Shutdown : Alarm
Threshold Temperature
(in Celsius)
------------- ------------ ------------ ------------ ------------ ------------
High Alarm 84.9555(A)
Low Alarm -10.0000(A)
High Warning 70.0000(A)
Low Warning 2.2525(A)
A means that the threshold is administratively configured.
DGS-3420-28SC:admin#
26-5 config ddm power_unit
Description
The command is used to configure the unit of DDM TX and RX power.
Format
config ddm power_unit [mw | dbm]
Parameters
mw - Specify the DDM TX and RX power unit as mW.
dbm - Specify the DDM TX and RX power unit as dBm.
Voltage Bias-Current
(V)
2.5
-
SPACE n Next Page p
Voltage
(V)
4.2500(A)
2.5000(A)
3.5000(A)
3.0000(A)
TX-Power
(mA) (mW)
50 3
- -
Previous Page r Refresh
Bias-Current TX-Power
(mA)
7.2500(A) 0.6250(A)
0.0040(A) 0.0060(A)
0.5000(A) 0.5500(A)
0.0080(A) 0.0080(A)
372
RX-Power
(mW)
4
-
RX-Power
(mW) (mW)
4.5500(A)
0.0100(A)
3.5000(A)
0.0300(A)