D-Link xStack DGS-3420 Series Reference Manual page 683

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#show mld_snooping multicast_vlan
Command: show mld_snooping multicast_vlan
MLD Multicast VLAN Global State
MLD Multicast VLAN Forward Unmatched
MLD Multicast VLAN Auto Assign VLAN
VLAN Name
VID
Member(Untagged) Ports
Tagged Member Ports
Source Ports
Untagged Source Ports
Status
Replace Source IP
Remap Priority
Total Entries: 1
DGS-3420-28SC:admin#
59-13 config mld_snooping multicast_vlan forward_unmatched
Description
This command is used to configure the forwarding mode for MLD snooping multicast VLAN
unmatched packets. When the switch receives an MLD snooping packet, it will match the packet
against the multicast profile to determine which multicast VLAN to associate with. If the packet does
not match all profiles, the packet will be forwarded in the natural VLAN of the packet, or dropped
based on this setting. By default, the packet will be dropped.
Format
config mld_snooping multicast_vlan forward_unmatched [disable | enable]
Parameters
enable - The packet will be flooded on the VLAN.
disable - The packet will be dropped.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the forwarding mode for MLD snooping multicast VLAN unmatched packets:
: Disabled
: Disabled
: Disabled
:test
:100
:1
:
:3
:
:Disabled
:Not Replaced
:None
678