D-Link xStack DGS-3420 Series Reference Manual page 777
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To enable the PTP function globally:
DGS-3420-28SC:admin# enable ptp
Command: enable ptp
Success.
DGS-3420-28SC:admin#
71-2
disable ptp
Description
This command is used to disable the PTP function globally. When the PTP function is disabled, all
switch ports will forward the PTP packets according to the multicast filtering configuration.
Format
disable ptp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the PTP function globally:
DGS-3420-28SC:admin# disable ptp
Command: disable ptp
Success.
DGS-3420-28SC:admin#
71-3
config ptp mode
Description
This command is used to configure the PTP device type of the switch. The switch supports three PTP
device types, which the user can set globally.
A Boundry Clock:
772
Advertisement
Table of Contents
