D-Link xStack DGS-3420 Series Reference Manual page 423

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#show storage_media_info
Command: show storage_media_info
Unit Drive Media Type
---- ----- ----------
1 c: Flash
DGS-3420-28SC:admin#
35-2 md
Description
This command is used to create a directory.
Format
md {{unit <unit_id>} <drive_id>} <pathname>
Parameters
unit - Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id> - Enter the unit ID value here.
<drive_id> - Specifies the drive ID. If not specified, it refers to the current drive.
<pathname> - Specify the directory to be created. The path name can be specified either as a
full path name or partial name. For a partial path name, it indicates the directory is in the
current directory.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create a directory:
DGS-3420-28SC:admin#md c:/abc
Command: md c:/abc
Success.
DGS-3420-28SC:admin#
35-3 rd
Description
This command is used to remove a directory. If there are files and directories still existing in the
directory, this command will fail and return an error message.
Size Label
-------- -----------
123 MB
418
FS Type Version
------- -------
FFS Ver2.1