D-Link xStack DGS-3420 Series Reference Manual page 442
Layer 2 managed stackable gigabit switch cli
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (499 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
disable igmp_proxy
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the IGMP proxy:
DGS-3420-28SC:admin#disable igmp_proxy
Command: disable igmp_proxy
Success.
DGS-3420-28SC:admin#
38-3
config igmp_proxy downstream_if
Description
This command is used to configure the IGMP proxy downstream interfaces. The IGMP proxy plays the
server role on the downstream interfaces. The downstream interface must be an IGMP-snooping
enabled VLAN.
Format
config igmp_proxy downstream_if [add | delete] vlan [<vlan_name 32> | vlanid <vidlist>]
Parameters
add - Specify to add a downstream interface.
delete - Specify to delete a downstream interface .
vlan – Specify the VLAN by name or ID.
<vlan_name 32> - Specify a name of VLAN which will be added to or deleted from the IGMP
proxy downstream interface. The maximum length is 32 characters.
vlanid - Specify a list of VLAN IDs to be added to or deleted from the IGMP proxy downstream
interface.
<vidlist> - Specify a list of VLAN IDs which will be added to or deleted from the IGMP proxy
downstream interface.
437
Advertisement
Table of Contents
