D-Link xStack DGS-3420 Series Reference Manual page 487

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display an IPv6 route:
DGS-3420-28SC:admin#show ipv6route
Command: show ipv6route
IPv6 Prefix: ::/0
Next Hop : FEC0::5
Total Entries: 1
DGS-3420-28SC:admin#
41-7 create ipv6route redistribute dst ripng src
Description
This command is used to create RIPng route redistribution to import routes from other routing domain
into RIPng routing domain.
Format
create ipv6route redistribute dst ripng src [local | static] {metric <value 0-16>}
Parameters
local - Redistribute local routes into RIPng.
static - Redistribute static routes into RIPng.
metric - (Optional) Specifies the RIPng route metric for the redistributed routes. When the metric
value is 0, the metric in the original route will become the metric of the redistributed RIPng
route transparently. If the metric of the original route is equal or greater than 16, the route will
be not redistributed.
<value 0-16> - Enter the value between 0 and 16.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create RIPng route redistribution:
Protocol: Static
IPIF : System
482
Metric: 1