D-Link xStack DGS-3420 Series Reference Manual page 878

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
Format
disable smtp
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable SMTP status:
DGS-3420-28SC:admin#disable smtp
Command: disable smtp
Success.
DGS-3420-28SC:admin#
14-3 config smtp
Description
This command is used to configure SMTP settings.
Format
config smtp {server <ipaddr> | server_port <port_number 1-65535> | self_mail_addr <mail_addr
254> | [add mail_receiver <mail_addr 254> | delete mail_receiver <index 1-8>]}
Parameters
server - Specify the SMTP server IP address.
<ipaddr> - Specify the SMTP server IP address.
server_port - Specify the SMTP server port.
<port_number 1-65535> - Specify the SMTP server port number between 1 and 65535.
self_mail_addr - Specify the sender's mail address.
<mail_addr 254> - Specify the sender's mail address. The maximum length is 254 characters.
add mail_receiver - Specify to add the mail receiver's address.
<mail_addr 254> - Specify to add the mail receiver's address. The maximum length is 254
characters.
delete mail_receiver - Specify to delete the mail receiver's address.
<index 1-8> - Specify the index between 1 and 8.
873