D-Link xStack DGS-3420 Series Reference Manual page 633

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3420-28SC:admin#config mac_based_access_control max_users 2
Command: config mac_based_access_control max_users 2
Success.
DGS-3420-28SC:admin#
55-13 config mac_based_access_control authorization attributes
Description
This command is used to enable or disable the acceptance of an authorized configuration. When
authorization is enabled for MAC-based access controls with RADIUS authentication, the authorized
attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server will be
accepted if the global authorization status is enabled. When authorization is enabled for MAC-based
access controls with local authentication, the authorized attributes assigned by the local database will
be accepted.
Format
config mac_based_access_control authorization attributes {radius [enable | disable] | local
[enable | disable]}(1)
Parameters
radius - Specify to enable or disable the authorized attributes assigned by the RADIUS server that
will be accepted.
enable - If specified to enable, the authorized attributes (for example VLAN, 802.1p default
priority, and ACL) assigned by the RADIUS server will be accepted if the global authorization
status is enabled. The default state is enabled.
disable - If specified to disable, the authorized attributes (for example VLAN, 802.1p default
priority, and ACL) assigned by the RADIUS server will not be accepted even if the global
authorization status is enabled.
local - Specify to enable or disable the authorized attributes assigned by the local database.
enable - If specified to enable, the authorized attributes assigned by the local database will be
accepted if the global authorization status is enabled. The default state is enabled.
disable - If specified to disable, the authorized attributes assigned by the local database will not
be accepted even if the global authorization status is enabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the configuration authorized from the local database:
DGS-3420-28SC:admin#config mac_based_access_control authorization attributes local
disable
Command: config mac_based_access_control authorization attributes local disable
628