Dialing By Name; Dialing A User's Voicemail Directly - Toshiba Strata CS User Manual

If you hear one of the previous prompts, enter the account code followed by
double beep, you can press # to use the contact's associated account code, or you can enter a
different account code and press
Note:
If you enter the wrong account code, press Flash before pressing # and the system will
let you re-enter it.
Depending on how your Strata CS system administrator configured your system, the prompt
may occur either after you dial the access code or after you dial the phone number. If the prompt
occurs after you dial the access code, enter the account code followed by
entering the phone number. For example:
[prompt]
9
where
9
and phone number.
Entering an account code during or before a call
During a call you can enter an account code or revise an account code already entered.
To enter an account code
1.
2.
You can also enter an account code before dialing the call. Press
the account code followed by

Dialing by name __________________________________________

You can dial another Strata CS user by name if you do not know the user's extension. To dial
by name, press
Your system administrator can remove you from the dial-by-name directory, or you can remove
yourself using ViewPoint, so that only callers who know your extension can dial you. See
"Customizing your listing in the dial-by-name directory" on page 18-9.

Dialing a user's voicemail directly ___________________________

If your system administrator enables this feature, you can leave a message in a user's voice
mailbox directly without ringing the user's phone. To do so, dial
example
You can also dial extension-plus-* from an auto attendant, so it might be useful to tell your
frequent callers about this feature if it is enabled. You can also use it as a quick way to leave
yourself a voice message when calling in.
3-4
8812 # 212 123 4567
is the access code,
8812
Press .
Flash *11
Enter the account code followed by
#
or .
411 *93
.
187*
.
#
is the account code, and the numbers after
. After pressing # you are returned to the call.
#
. When you hear the dial tone, dial the phone number.
. If you hear the
#
, and then continue
#
are the area code
#
at a dial tone, and then enter
*11
after the extension, for
*