Toshiba Strata CS User Manual page 270

4.
18-14
Pickup answers a ringing SDN.
!
phone connects you immediately to the call. If unchecked, to connect to a ringing
SDN call you must pick up the phone, then press the SDN. For information on
SDNs, see "Using SDNs" on page 4-13.
When PDNs ring, picking up the phone always connects you to the call.
Use the feature buttons list at the top of the widow to configure the programmable
buttons on your phone. To configure a button, click the button number in the
column, then select a feature from the dropdown list in the
For a full list of features that you can map to a programmable button, see the next
section. For a description of PDNs and SDNs, see "Using line appearances" on
page 4-12.
To find which button on a phone corresponds to the button number in Strata CS, press
the buttons on the phone. Unassigned buttons display their Strata CS button numbers
in the phone's LCD display.
Note:
On the T-series Norstar phone, button settings you make in Strata CS apply to
that button plus one on the phone. For example, if you assign Speed Dial to button 1,
press button 2 on the phone for Speed Dial. Button 1 on the T-series Norstar is reserved
for speakerphone use.
The following features require additional steps:
Access Voice Mail.
!
account is accessed. By default it is the account of the user currently logged into the
phone.
Note:
If the phone has no message waiting light, the button programmed for Access
Voice Mail lights for your new messages, as long as you are selected in the
Parameter column.
Click the button in the
Call Forwarding.
!
Forwarding dialog box. Select or enter the number to forward your calls to, and
click . For instructions, see "Forwarding calls in ViewPoint" on page 15-3.
OK
Set Personal Status.
!
attach to this button. The button functions as a toggle that switches your personal
status between the personal status selected and "Available."
If checked, when an SDN rings, picking up the
Click the column to select the user whose voicemail
Parameter
Parameter
Click the
Parameter
column.
Feature
column to open the Call
column to select the personal status to
Button