Table of Contents
Advertisement
VIPedge
The Basics
Making a Call
Handset
Spkr Button
Hot Dialing
Dial Directory
18
There are three ways to originate a call from the telephone:
1. To make a call, lift the handset, then dial the number.
A line may be automatically selected or choose a line manually. Dial tone is
heard through the handset. The Speaker and Microphone LEDs do not light.
Digits display as they are dialed. Call progress tones (Ringback Tone, Busy
Tone, etc.) are heard through the handset.
2. When connected, continue using the handset or switch to speakerphone
by holding down Spkr and placing the handset in the cradle.
1. To make a call, press Spkr.
A line may be selected automatically or choose a line manually. The
extension or Line button lights (depending on system programming). Dial
tone is heard through the speaker. The Speaker and Microphone LEDs light.
2. Dial the number.
Digits display as they are dialed. Call progress tones (Ringback Tone, Busy
Tone, etc.) are heard through the speaker.
When connected, continue using the speakerphone or lift the handset to
continue the conversation.
1. To make a call using Hot Dialing, start dialing the number.
The extension button, Spkr and Mic LEDs light. Digits display as they are
dialed. Call progress tones (Ringback Tone, Busy Tone, etc.) are heard
through the speaker.
2. When connected, continue using the speakerphone or lift the handset to
continue the conversation.
Calls can be made by selecting a name from the alphabetical telephone
directory.
To access the Directory
1. Press DIR soft key.
Select Directory menu appears.
The soft keys on the Select Directory are:
My = Personal Speed Dial Names
EXTR = System Speed Dial Names
INTR = Directory Number Names
Dial = Cancel directory, get dial tone.
2. Choose the directory you wish to access and use the dial pad to enter the
name.
Notes:
If a directory is not selected and a name is entered, all directories will be
•
searched.
TOSHIBA
VIPedge UG
12/12
Advertisement
Table of Contents
