Determining What Lens Warnings Are Displayed; Lens Control Limitations - Christie Mirage SST-6P User Manual

Hide thumbs Also See for Mirage SST-6P:

Table of Contents

Issuing the (LCB+ZOOM 1) serial command also manually calibrates the lens.

2. To start the calibration, select Calibrate Zoom Lens.

3. At the confirmation prompt, select Calibrate Zoom Lens.

The Zoom menu item is greyed out until the calibration is complete, which can take up to a

minute.

Determining what lens warnings are displayed

Controls the level of lens warnings displayed.

1. Select MENU > Configuration > Lens Settings > Lens Warnings.

2. Select the appropriate lens warning level:

•

Show All Warnings—Shows all lens warnings.

•

Hide Zoom Motor Warnings—Hides zoom motor warnings. Christie recommends

selecting this option when using a fixed lens as all zoom operations are disabled.

•

Hide Detection Warnings—Hides lens detection warnings. Christie recommends

selecting this option when using a third-party lens.

3. Select Enter.

The projector has keep-out areas for the lens position, illustrated below. When adjusting the lens

offset, these regions are unavailable to prevent interference and potentially damage of internal

components.

Mirage SST User Guide

020-102993-06 Rev. 1 (10-2021)

Adjusting the image

Table of Contents

Mirage sst