Snmp Settings; Date And Time; Environment Settings - Eaton Network Management Card User Manual

•
Shutdown timer selected
•
Shutdown duration
•
Battery capacity exceeds
•
Outlet 2 & 3:
•
Name
•
Switch off after
•
Remaining capacity limit
•
Shutdown duration
•
Switch on after
6.2.6

SNMP settings

These settings configure the 2 SNMP versions available, v1 and v3.
The parameter list is the following:
•
Version
•
SNMP v1 community Read-Only
•
SNMP v1 write enables
•
SNMP v1 community write
•
SNMP v3 user Read-Only
•
SNMP v3 security Read-Only
•
SNMP v3 password Read-Only
•
SNMP v3 user Read-Write
•
SNMP v3 security Read- Write
•
SNMP v3 password Read- Write
•
Notification user name
6.2.7

Date and time

These settings enable the initialisation of the date and time of the card in three different ways.
The parameter list is the following:
•
Date & Time
•
Type of synchronisation
•
NTP host name
•
Time-Zone
•
Daylight saving time
6.2.8

Environment settings

These settings enable the configuration of the environment sensor. If not present, this menu is not available.
The parameter list is the following:
•
Sensor name
•
Temperature:
•
Unity
Network Management Card
– User Manual 34003991XT_EN/EF
Page
80/127