Eaton Network Management Card User Manual page 60

SNMP Version: This field allows the user to select the snmp protocol version: {Disabled, V1, V3 are supported
by the card}.
SNMP Community Read-Only: The SNMPv1 Read community name that identifies a sub-group attached to a
network manager or a logical entity. The card and the clients must share the same community name to
communicate.
SNMP Write Enabled: Enables SNMP write function.
SNMP Community Write: Displays only if SNMP Write is enabled. The SNMPv1 Write community name that
identifies a sub-group attached to a network manager or a logical entity. The card and the clients must share the
same community name to communicate.
Read-Only User: identifies the login of the user in the SNMPv3 version which is authorized to read only SNMP
variables.
The Read-Only Security Level: selects the security level
No Auth No Priv: the user must not use authentication and privacy to access to SNMP variables.
Auth No Priv: the user must use authentication and NOT privacy to access to SNMP variables.
Auth Priv: the user must use authentication and privacy to access to SNMP variables.
The Read-Only Password: allows administrator to specify a new password for the Read-Only User. Its length
must be ranging between 8 and 24 characters and used only letters, numbers and <>&@#%_=:;,./?|$*() symbols.
The Read-Write User: identifies the user in the SNMPv3 version which is authorized to read and write SNMP
Network Management Card Page
– User Manual 34003991XT_EN/EF 60/127