Configuration; Configure Ip Parameters - Eaton Network Management Card User Manual

3 Configuration

3.1 Configure IP parameters

Once the card has started:
Connect one end of the cable (34003918) to the Service port.
Connect the other end of the cable to the COM port (IOIOI) of a PC.
Launch a HyperTerminal™ type emulator with the following configuration:
Speed: 9600
Data bits: 8
Parity: none
Stop bits: 1
Flow control: none
"Locally reproduce the characters entered" option: deactivated.
Enter admin. The main menu is displayed:
-----------------------------------------------------------------------------
EATON
NETWORK MANAGEMENT CARD
-----------------------------------------------------------------------------
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
0 : Exit
-----------------------------------------------------------------------------
Network Management Card
– User Manual 34003991XT_EN/EF
Page
20/127