System Settings; Trap Receivers; Access Control; Shutdown Settings - Eaton Network Management Card User Manual

6.2.2

System settings

These settings enable the customisation of the information on the UPS properties pages.
The parameter list is the following:
•
UPS contact
•
UPS location
•
UPS name
•
History log interval
•
Environment log interval
•
Log separator
•
Default language
6.2.3

Trap receivers

This is the list of the supervision stations receiving traps. There is a maximum of 3 trap receivers.
The parameter list is the following:
•
Receiver 1, 2 or 3 :
•
Host name
•
Application name
•
Trap community
•
Protocol
•
MIB filter
6.2.4

Access control

These settings enable the configuration for secure access to the card via a web browser or SNMP. This menu can
also define Telnet/SSH/CLI procedure to access to the card.
The parameter list is the following:
•
Login
•
Password
•
Security mode
•
Telnet access
•
Telnet security
•
Console interface
6.2.5

Shutdown settings

These settings are used to define the behaviour of the UPS during a shutdown.
The parameter list is the following:
•
Outlet 1 (main):
•
Name
•
Remaining time limit
•
Remaining capacity limit
•
Shutdown after
Network Management Card
– User Manual 34003991XT_EN/EF
Page
79/127