variables.
The Read-Write Security Level: selects the security level:
No Auth No Priv: the user must not use authentication and privacy to access to SNMP variables.
Auth No Priv: the user must use authentication and NOT privacy to access to SNMP variables.
Auth Priv: the user must use authentication and privacy to access to SNMP variables.
The Read-Write Password: allows administrator to specify a new password for the Read-Write User. Its length
must be ranging between 8 and 24 characters and used only letters, numbers and <>&@#%_=:;,./?|$*() symbols.
The Notification username: allows administrator to specify the "username" field for SNMPV3 notifications. This
field has to also be defined in the applications that received those notifications.
Save: Saves any modifications.
Network Management Card
Page
– User Manual
34003991XT_EN/EF
61/127