Access Control Settings - Eaton Network Management Card User Manual

6.4.5.2 "setShutdown"
Purpose To modify a shutdown setting
Syntax setShutdown N [option1] [option2] ...
N = 1|2|3
options for N=1:
iName = "xx..xx"
RunTimeToEmptyLimit = xx (0..9999 in sec)
RemainingCapacityLimit = xx (0..100 in sec)
ShutdownTimerSelected = 0|1 (0=No, 1=Yes)
ShutdownTimer = xx (0..5999940/60 in min)
ShutdownDuration = xx (120..999 in sec)
RestartLevel = xx (0..100 %)
options for N=2 or 3:
iName = "xx..xx"
ShutdownTimer = xx (99..99999 in sec)
RemainingCapacityLimit = xx (0..100 in sec)
ShutdownDuration = xx (120..999 in sec)
StartupTimer = xx (0..65535 in sec)
Examples #> setShutdown 1 ShutdownDuration=120
Comments
6.4.6

Access control settings

6.4.6.1 "getAccess"
Purpose To read an access control setting
Syntax getAccess [option1] [option2]...
options :
Login
Password
Security
Examples #> getAccess Login
(1)
Comments : All characters are replaced with the star character '*'
6.4.6.2 "setAccess"
Purpose To modify an access control setting
Syntax setAccess [option1] [option2]
options :
Login = "xx..xx"
Password = "**..**"
ConfirmPass = "**..**"
Network Management Card
(1)
(1)(2)
(1)(2)
– User Manual 34003991XT_EN/EF
Page
99/127