Date And Time Menu; Environment Menu - Eaton Network Management Card User Manual

------------------------------------------------------------------------
NETWORK MANAGEMENT CARD
Access settings
------------------------------------------------------------------------
1 : New Login [MyName]
2 : Password [***********]
3 : Security Mode (1=conf., 2=full auth., 3=full auth. & SSL) [1]
4 : Telnet access enabled (0=No, 1=Yes) [1]
5 : Telnet security enabled (0=No, 1=Yes) [0]
6 : Console interface (Menu, CLI) [Menu]
0 : Exit
----------------------------------------------------------------------
(1) Write-only and encrypted
(2) Read-write or read-only according to "Telnet access enabled" status.
6.3.9

Date and time menu

This menu defines the date and time management.
------------------------------------------------------------------------
NETWORK MANAGEMENT CARD
Date & Time settings
------------------------------------------------------------------------
1 : Date (yyyy/mm/dd) [2010/11/05]
2 : Hour (HH:MM:SS] [11:30:00]
3 : Type of synchronization (MANUAL, AUTO, NTP) [MANUAL]
4 : Host Name [ntpserver]
5 : Time zone (+/-hh:mm) [ 0: 0]
6 : Day light enabled (0=No, 1=Yes) [0]
0 : Exit
----------------------------------------------------------------------
(1) Read-write or read-only according to "Type of synchronization" status
(2) Setting resolves to the nearest half hour; for example, sending +02:36 results in +02:30, and sending +02:46
results in +03:00.

6.3.10 Environment menu

These menus define the settings of the environment sensor.
Network Management Card
(1)
(2)
(2)
(1)
(1)
(2)
– User Manual 34003991XT_EN/EF
Page
89/127