8.2 SNMP objects
8.2.1
IETF MIB
The Card implements the full IETF standard UPS MIB (RFC 1628), including the IETF alarm table and traps. Visit
http://tools.ietf.org
for a description of the MIB. The UPS MIB access path is 1.3.6.1.2.1.33
8.2.2
EATON Pulsar MIB (ex MGE)
This section contains an overview of MIB definitions for each of the MIB files:
Eaton Pulsar MIB (MGE MIB)
Eaton Pulsar MIB (MGE MIB) for environmental sensors
The NMC implements the reduced Eaton Pulsar MIB (MGE MIB), only the objects listed in the following tables are
managed. The entire MIB description is available at
The Eaton Pulsar MIB access path is 1.3.6.1.4.1.705.1.
MIB object
upsmgIdentFamilyName
upsmgIdentModelName
upsmgIdentFirmwareVersion
upsmgIdentSerialNumber
upsmgConfigLowBatteryTime
upsmgConfigLowBatteryLevel
upsmgConfigAutoRestart
upsmgConfigVARating
upsmgBatteryRemainingTime
upsmgBatteryLevel
upsmgBatteryVoltage
upsmgBatteryCurrent
upsmgBatteryFaultBattery
upsmgBatteryReplacement
upsmgBatteryLowBattery
upsmgBatteryChargerFault
upsmgBatteryLowCondition
upsmgInputPhaseNum
mginputVoltage_1
mginputVoltage_2
mginputVoltage_3
mginputFrequency_1
Network Management Card
http://download.mgeops.com
SNMP Format
String
String
String
String
seconds
%
1(yes) 2(no)
VA
seconds
%
deciVolts
deciAmps
1(yes) 2(no)
1(yes) 2(no)
1(yes) 2(no)
1(yes) 2(no)
1(yes) 2(no)
DeciVolts
DeciVolts
DeciVolts
DeciHz
– User Manual
34003991XT_EN/EF
Add.path
{1.1.0}
{1.2.0}
{1.4.0}
{1.7.0}
{4.7.0}
{4.8.0}
{4.9.0}
{4.12.0}
{5.1.0}
{5.2.0}
{5.5.0}
{5.6.0}
{5.9.0}
{5.11.0}
{5.14.0}
{5.15.0}
{5.16.0}
{6.1.0}
{6.2.1.2.1.0}
{6.2.1.2.2.0}
{6.2.1.2.3.0}
{6.2.1.3.1.0}
Page
117/127