Supervision Of The Upss Over The Network; Connection - Eaton Network Management Card User Manual

1.1.3

Supervision of the UPSs over the network

Depending on your needs, you can either use:
Internet browser to monitor each UPS, as IPP Shutdown Controller and Management Card includes a Web server
Company's standard Network Management System (HP-Openview, CA Unicenter, HP Insight Manager, IBM
Tivoli Netview)
To simplify integration of EATON UPSs, use one of the Network Management System Kits for EATON devices.
These kits are available on the Software Suite CD-ROM or on the
The supervisor "Intelligent Power Manager".
1.1.4

Connection

Before installing the Network Solution, the UPS must be set up as indicated in the steps below.
Shut down the computers to be protected by the UPS.
Connect the UPS to a wall outlet. (For UPSs above 3kVA, please refer to the UPS installation manual).
Connect the power cord of each computer to an outlet on the UPS. (For more details, please refer to the UPS
installation manual)
Network Management Card
– User Manual 34003991XT_EN/EF
http://powerquality.eaton.com website.
Page
8/127