Logging In - Eaton Network Management Card User Manual

4.2.3

Logging In

By default, the user name and password are both admin (see Figure).
Both the user name and password fields accept up to a maximum of ten characters. After five minutes have
elapsed, or if the browser is closed and reopened, you must re-enter the user name and password.
An error in either field results in rejection of the requested action (such as save, page access, or card reboot).
After three unsuccessful login attempts, you must refresh the browser. Both the user name and password fields
are encrypted with an MD5 type algorithm, ensuring total security.
See "Set Login Password to Default" to reset the password.
Network Management Card Page
– User Manual 34003991XT_EN/EF 37/127