Connecting The Ups To The Ethernet Network; Protection Of The Computers/Servers - Eaton Network Management Card User Manual

1.1.1

Connecting the UPS to the Ethernet network

This function can be performed through network Cards inserted in the UPS (Network Management Card).
Also a software "agent" running on a nearby PC that is called the IPP Shutdown controller feature can be used.
IPP Shutdown controller feature allows USB or Serial connected UPS to be seen on the network through the PC.
The Network Management Card or Proxy:
Manages communication with the UPS (as well as local protection of the machine on which Proxy is installed).
Periodically accesses the information concerning the UPS.
Makes this information available to the connected applications (Intelligent Power Protector, Web Browser,
Network Management Systems, Intelligent Power Manager).
Sends notifications on certain events.
Operation may be in standard secure mode (the default mode) or in SSL secured mode (Secure Socket Layer
SSL).
1.1.2

Protection of the computers/servers

This function is performed by Intelligent Power Protector installed on each of the computers to be protected.
Note that Intelligent Power Protector are available on several Operating Systems.
Protection applications:
Continuously gets information from the Network Management Card/Proxy connected to the UPS.
Warns administrators and users if AC power fails and proceeds to a graceful system shutdown before the end of
battery backup power is reached.
Network Management Card
– User Manual 34003991XT_EN/EF
Page
7/127