Date And Time - Eaton Network Management Card User Manual

4.4.7

Date and time

Click on Date and Time in the menu.
This menu enables initialisation of the date and time of the card in three different ways.
The date format is always of year/month/day type
Set manually: Enables initialisation of the date and time of the card, with the values entered in the Date and Time
.
fields. This update is made after clicking on the Save button
Maximum drift is +/- 2 min./month
Accept automatic update from IPP or IPM: Enables initialisation of the date and time of the card, with the
values provide by the Intelligent Power Protector or the Intelligent Power Manager.
Network Management Card Page
– User Manual 34003991XT_EN/EF 62/127