Eaton Network Management Card User Manual page 9

1.1.4.1 How to connect UPS / agent / network:
Insert the optional NMC communication card in the UPS and connect the UPS to the computer network.
Start the UPS, then the computers.
1.1.4.2 Setting up the protection:
Set up the Network Management Card (see user manual).
Install and configure the protection application on all machines that are to be protected by the UPS:
Intelligent Power Protector for EATON Pulsar series UPS: The software components for each platform and the
user manuals are on the Software Suite CD or available at http://powerquality.eaton.com
Network Management Card Page
– User Manual 34003991XT_EN/EF 9/127