Eaton Network Management Card User Manual page 85

------------------------------------------------------------------------
NETWORK MANAGEMENT CARD
Network settings - SMTP
------------------------------------------------------------------------
1 : Hostname (for Email notification) [smtpserver]
2 : Authentication (0=No, 1=Yes) [1]
(1)
3 : Login [smtplogin]
4 : Password [*************]
0 : Exit
----------------------------------------------------------------------
(1) Read-only or read-write according to "Authentication" status
(2) Write-only or hidden according to "Authentication" status
------------------------------------------------------------------------
NETWORK MANAGEMENT CARD
Network settings - SNMP
------------------------------------------------------------------------
1 : Version (Disabled, V1, V3, V1V3) [V1V3]
** About V1 **
2 : Community read-only [publicuser]
3 : SNMP write (0=No, 2=Yes) [2]
4 : Community write [privateuser]
** About V3 **
5 : Read-only user [readuser]
6 : R/O security (1=No Auth, 2=Auth NoPriv, 3=Auth Priv) [2]
7 : Read-only password [***********]
8 : Read-Write user [writeuser]
9 : R/W security (1=No Auth, 2=Auth NoPriv, 3=Auth Priv) [2]
10 : Read-Write password [***********]
11 : Notification user name [notifuser]
0 : Exit
----------------------------------------------------------------------
All items from 2 to 10 are read-write or masqued according to "Version" status.
(1) Read-write or read-only according to "SNMP write" status;
(2) Write-only or hidden according to "R/O security" status; the length has to be 8 characters at least;
(3) Write-only or hidden according to "R/W security" status; the length has to be 8 characters at least.
Network Management Card
(2)
(1)
(2)
(3)
– User Manual 34003991XT_EN/EF
Page
85/127