Return To Default Login/Password; Return To Default Configuration - Eaton Network Management Card User Manual

------------------------------------------------------------------------
NETWORK MANAGEMENT CARD
Environment settings - Humidity
------------------------------------------------------------------------
1 : High Threshold [90 ]
2 : Low Threshold [5]
3 : Hysteresis [5]
4 : Offset [0.0]
5 : High notify (0=No, 1=Yes) [0]
6 : Low notify (0=No, 1=Yes) [0]
7 : High shutdown (0=No, 1=Yes) [0]
8 : Low shutdown (0=No, 1=Yes) [0]
0 : Exit
------------------------------------------------------------------------
------------------------------------------------------------------------
NETWORK MANAGEMENT CARD
Environment settings – Input #1
------------------------------------------------------------------------
1 : Identifier [Fan1]
*** State 0 ***
2 : Label [Fan running]
3 : Notify (0=No, 1=Yes) [0]
4 : Shutdown (0=No, 1=Yes) [0]
*** State 1 ***
5 : Label [Fan stopped]
6 : Notify (0=No, 1=Yes) [0]
7 : Shutdown (0=No, 1=Yes) [0]
0 : Exit
------------------------------------------------------------------------

6.3.11 Return to default Login/Password

If the login or password is lost, select this option to enable the return to the default Login/Password.

6.3.12 Return to default configuration

This item is used to return to default configuration which is described in this document.
The NMC card is automatically restarted after returns to default configuration.
Network Management Card
– User Manual 34003991XT_EN/EF
Page
91/127