Eaton Network Management Card User Manual page 127

Network management card
Hide thumbs Also See for Network Management Card:
Table of Contents

Advertisement

Normally, the mask is automatically determined by the class of address, which defines in a unique manner the
network part/equipment part division of the IP address.
- Class A: internet address: 255.0.0.0.
- Class B: internet address: 255.255.0.0.
- Class C: internet address: 255.255.255.0.
TELNET TErminaL over NETwork
Telnet is a terminal emulation protocol. It is used to access and configure the parameters for the NMC.
Trap (SNMP): This term describes an event that affects a MIB variable. Traps are sent to the manager, which is
programmed to perform specific tasks upon reception of the traps.
Network Management Card
Page
– User Manual
34003991XT_EN/EF
127/127

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents