I Transmitting A Dtmf Code - Icom IC-2820H Instruction Manual

I Transmitting a DTMF code

D Automatic transmission (DTMF memory)
qPush and hold [TONE•DTMF] for 1 sec. to turn the
ON.
TX"
• "1" appears in place of the main band's display.
wRotate [DIAL] to select the
[MAIN•BAND] to enter DTMF memory programming con-
dition.
eRotate [DIAL] to select the desired DTMF memory channel
then push [MAIN•BAND].
rPush [V/MHz•SCAN] (Right band's) to return VFO mode.
t Push [PTT] to transmit the selected DTMF memory content.
yPush and hold [TONE•DTMF] for 1 sec. , then turn the
OFF to cancel the DTMF encoder.
"AUTO TX"
• When the DTMF encoder is turned ON continuously, each push
of the PTT transmits the previously selected DTMF code.
z Push [FUNC] then [
DTMF
DTMF memory encoder ON.
• "d" appears in place of the main band's 100 MHz digit.
x Push [
B(D-OFF)] to enter the DTMF memory
SET
programming condition.
c Push [Y] or [Z] to select the desired channel.
v Push [PTT] to transmit the selected memory.
• Exit the programming condition automatically.
• Each push of [PTT] transmits the DTMF code.
b Push [FUNC] then [
DTMF memory encoder.
• When the DTMF encoder is turned ON continuously,
each push of the PTT transmits the previously se-
lected DTMF code.
"AUTO
DTMF MEMORY, then push
" "
6(DTMF)] to turn the
LOW
B(D-OFF)] to cancel the
SET
DTMF MEMORY ENCODER
D Transmitting a DTMF memory directly
z Push [FUNC] then [
DTMF-S
DTMF memory encoder ON.
• "d" appears in place of the main band's 100 MHz digit.
x Push [DTMF-S] to turn the DTMF memory di-
rect selection ON.
• The function indicator (microphone) lights green.
c Push the desired DTMF channel.
• "0" to "9" and "A" to "D" are available for DTMF
memory channels.
• The selected DTMF code is automatically transmit-
ted without pushing PTT.
NOTE: When no DTMF code programmed chan-
nel number is pushed, it transmits the relative
DTMF code as the manual transmission de-
scribed in the next page.
v Push [DTMF-S] again to deactivate the DTMF
memory direct selection.
b Push [FUNC] then [
the DTMF memory encoder.
9
6(DTMF)] to turn the
LOW
B(D-OFF)] to cancel
SET
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
60